Show Cam-Usage - Dell S6100 Configuration Manual

Version
7.8.1.0
Usage Information The display reflects the settings implemented with the cam-acl command.
Example

show cam-usage

Display the amount of memory space used and available in each CAM partition (including Layer 2 ACL, Layer 3 ACL, and IPv4Flow)
Syntax show cam-usage [acl | router | switch]
Parameters
acl
router
switch
Defaults none
Command Modes EXEC Privilege
Command History
Version
9.11(2.0P1)
9.11.0.0
9.7(0.0)
9.7(0.0)
Usage Information The following regions must be provided in the show cam-usage output:
•
•
•
The following table describes the output fields of the show cam-usage command.
Table 1. Output fields of the show cam-usage command
Field
Stackunit
Portpipe
CAM-Region
Total CAM space
Used CAM
458 Content Addressable Memory (CAM)
Description
Introduced on the C-Series.
(OPTIONAL) Enter the keyword acl to display Layer 2 and Layer 3 ACL CAM usage.
(OPTIONAL) Enter the keyword router to display Layer 3 CAM usage.
(OPTIONAL) Enter the keyword switch to display Layer 2 CAM usage.
Description
Optimized the ACL filters to support more than 200 egress ACL rules on the S6000,
S6000–ON, S6100–ON, Z9100–ON.
The show cam-usage command is updated to display ECMP count information.
Introduced on the S6000-ON.
Introduced on the S4810, S4820T, S6000 and Z9000.
L3AclCam
L2AclCam
V6AclCam
Description
Number of the stack unit that contains information on
ACL VLAN groups
The hardware path that packets follow through a
system for ACL optimization
Type of area in the CAM block that is used for ACL
VLAN groups
Total amount of space in the CAM block
Amount of CAM space that is currently in use