Bgp Outbound-Optimization - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information
In Non-Deterministic mode, paths are compared in the order in which they arrive. This method can lead to Dell
Networking OS choosing different best paths from a set of paths, depending on the order in which they are
received from the neighbors because MED may or may not get compared between adjacent paths. In Deterministic
mode (no bgp non-deterministic-med), Dell Networking OS compares MED between adjacent paths
within an AS group because all paths in the AS group are from the same AS.
When you change the path selection from Deterministic to Non-Deterministic, the path selection for the existing
paths remains Deterministic until you enter the clear ip bgp command to clear existing paths.

bgp outbound-optimization

Enables outbound optimization for IBGP peer-group members.
Syntax bgp outbound-optimization
To disable outbound optimization, enter the no bgp outbound-optimization command.
Defaults Enabled.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.4.(0.0)
358 Border Gateway Protocol
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Introduced on the S4810.