Clear Host - Dell S6100 Configuration Manual

clear host

Removes one or all dynamically learned host table entries for a specific VRF.
Syntax clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name
host-name
*
Defaults None
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
Usage Information Use this command to delete one or all dynamically learned host table entries corresponding to a specific VRF.
Example
Dell# clear host vrf jay dell
Dell# clear host
(Optional) Enter the key word vrf and then the name of the VRF to delete dynamically
learned host table entries corresponding to that VRF.
Enter the name of the host corresponding to which you want to delete the dynamically
learnt host table entries.
Enter * to delete all host table entries.
Description
Introduced on the S6100.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S-Series and Z-Series.
vrf jay *
Dynamic Host Configuration Protocol (DHCP) 581