Dell S6100 Configuration Manual page 803

Hide thumbs Also See for S6100:
Table of Contents

Advertisement

Field
Destination
Gateway
Dist/Metric
Last Change
Example
Dell# show ip route all
Codes:C- connected, S - static, R - RIP
Gateway of last resort is not set
----------- ------- ----------- -----------
R
> R 100.10.10.0/24
C
> R 101.10.10.0/24
Dell#
Example (Summary) Dell# show ip route summary
Route Source
connected
static
Total
Total 3 active route(s) using 612 bytes
R1_E600i>show ip route static ?
|
<cr>
R1_E600i>show ip route static
----------- ------- ----------- -----------
*S
Dell>
Description
L1 = IS-IS level-1
L2 = IS-IS level-2
IA = IS-IS inter-area
* = candidate default
> = non-active route
+ = summary routes
The weight for weighted ECMP route calculations is displayed for each path in the route
in show ip route command. The ECMP weight is displayed only if weighted ECMP is
enabled using the ip ecmp weighted command is enabled.
If weighted ECMP is disabled, the show ip route command does not show the
weighted ECMP route information.
Identifies the route's destination IP address
Identifies whether the route is directly connected and on which interface the route is
configured.
Identifies if the route has a specified distance or metric.
Identifies when the route was last changed or configured.
B- BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated
O- OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1
N2- OSPF NSSA external type 2, E1 - OSPF external type 1
E2- OSPF external type 2, i - IS-IS, L1 - IS-IS level-1
L2- IS-IS level-2, IA - IS-IS inter area, * - candidate default
>- non-active route + - summary route
Destination
Gateway
3.0.0.0/8
via 100.10.10.10, Te 1/1/8/1 120/1
via 101.10.10.10, Te 1/1/8/2
100.10.10.0/24
Direct, Te 1/1/8/1
Direct, Te 1/1/8/2
101.10.10.0/24
Direct, Te 1/1/8/1
Direct, Te 1/1/8/2
Active Routes
2
1
3
Pipe through a command
Destination
Gateway
0.0.0.0/0
via 10.10.91.9, Te 1/1/2/1
Dist/Metric Last Change
Non-active Routes
0
0
0
Dist/Metric Last Change
00:07:12
0/0
00:08:54
120/0
00:08:54
0/0
00:09:15
120/0
00:09:15
1/0
3d2h
IPv4 Routing
803

Advertisement

Table of Contents
loading

Table of Contents