Domain-Password - Dell S6100 Configuration Manual

domain-password

Set the authentication password for a routing domain.
Syntax domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5
encryption-type
password
Defaults No default password.
Command Modes ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
6.3.1.0
Usage Information The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number PDUs (CSNPs),
and partial sequence number PDUs (PSNPs).
Related Commands
•
•
(OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.
(OPTIONAL) Enter 7 to encrypt the password using DES.
Enter an alphanumeric string up to 16 characters long. If you do not specify an
encryption type or hmac-md5 keywords, the password is processed as plain text
which provides limited security.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
area-password — configure an IS-IS area authentication password.
isis priority — configure the authentication password for an interface.
Intermediate System to Intermediate System (IS-IS) 853