Dell S6100 Configuration Manual page 619

Version
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.4.1.0
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available
rings. Dell Networking OS requires a command line confirmation before the command executes. This command
clears the following counters:
•
•
•
Usage Information Executing this command without the optional ring-id command clears the statistics counters on all the available
rings. Dell Networking OS requires a command line confirmation before the command is executed. This command
clears the following counters:
•
•
•
Example (Summary) Dell# show frrp summary
Ring-ID State Mode
----------------------------------------------
2
31
50
Dell#
Example (1)
Dell# show frrp 1
Ring protocol 1 is in Master mode
Ring Protocol Interface:
Primary : TenGigabitEthernet 1/1/1/1 State: Forwarding
Secondary: Port-channel 100 State: Blocking
Control Vlan: 1
Ring protocol Timers: Hello-Interval 50 msec Dead-Interval 150 msec
Ring Master's MAC Address is 00:01:e8:13:a3:19
Topology Change Statistics: Tx:110 Rx:45
Hello Statistics: Tx:13028 Rx:12348
Number of state Changes: 34
Member Vlans: 1000-1009
Dell#
Example (2 Dell# show frrp 2 summary
Summary)
Dell#show frrp 2 summary
Ring-ID State Mode
-----------------------------------------------
Description
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
hello Rx and Tx counters
Topology change Rx and Tx counters
The number of state change counters
Ctrl_Vlan Member_Vlans
UP Master
UP Transit
Down Transit
Ctrl_Vlan Member_Vlans
2 11-20, 25,27-30
31 40-41
50 32
Force10 Resilient Ring Protocol (FRRP) 619