Clear Ets Counters - Dell S6100 Configuration Manual

clear ets counters

Clear all ETS TLV counters on an interface.
Syntax clear ets counters port-type slot/port[/subport]
Parameters
port-type
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0
show interface ets
Displays the ETS configuration applied to egress traffic on an interface, including priority groups with priorities and bandwidth allocation.
Syntax show interface port-type slot/port[/subport] ets {summary | detail}
Parameters
port-type slot/
port[/subport] ets
{summary | detail}
•
•
Enter the keywords port-type then the slot/port information. Enter the subport
number if a 40G port is fanned-out into 10G ports.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S6000-ON and Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter the port-type slot and port ETS information. Enter the subport number if a 40G
port is fanned-out into 10G ports.
Enter the keyword summary for a summary list of results or enter the keyword detail
for a full list of results.
NOTE: This command also enables you to view information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for specifying port range in the command is different
from how you specify in non-ON platforms.
For non-ON platforms, you can specify multiple ports as slot/port-range. For example, if you want to
display information corresponding to all ports between 1 and 4, specify the port range as show interfaces
interface-type 1/1 - 4.
For ON platforms, you can specify multiple ports as slot/port/[subport] - slot/port/
[subport]. For example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as show interfaces interface-type 1/1/1 - 1/1/4.
Data Center Bridging (DCB) 487