Show Mac-Address-Table - Dell S6100 Configuration Manual

show mac-address-table

Display the MAC address table.
Syntax show mac-address-table [address mac-address | interface interface | vlan vlan-
id] [aging-time] [dynamic | static] [count [vlan vlan-id] [interface interface-
type [slot [/port[/subport]]]]]
Parameters
address mac-
address
dynamic
static
aging-time
interface interface
interface interface-
type
vlan vlan-id
count
Command Modes
•
•
(OPTIONAL) Enter the keyword address then a MAC address in the nn:nn:nn:nn:nn:nn
format to display information on that MAC address.
(OPTIONAL) Enter the keyword dynamic to display only those MAC addresses the
switch dynamically learns. Optionally, you can also add one of these combinations:
address/mac-address, interface/interface, or vlan vlan-id.
(OPTIONAL) Enter the keyword static to display only those MAC addresses
specifically configured on the switch. Optionally, you can also add one of these
combinations: address/mac-address, interface/interface, or vlan vlan-
id.
Enter the keyword aging-time to display only aging-time information.
(OPTIONAL) Enter the keyword interface and the interface information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
(OPTIONAL) Instead of entering the keyword interface then the interface type, slot/
port[/subport] information, as above, you can enter the interface type, then just a slot
number.
(OPTIONAL) Enter the keyword vlan then the VLAN ID to display the MAC address
assigned to the VLAN. The range is 1 to 4094.
(OPTIONAL) Enter the keyword count, then optionally, by an interface or VLAN ID, to
display total or interface-specific static addresses, dynamic addresses, and MAC
addresses in use.
EXEC
EXEC Privilege
Layer 2 929