Clear Hardware Pfc-Nodrop-Priority - Dell S6100 Configuration Manual

clear hardware pfc-nodrop-priority

Clear the drop statistics.
Syntax clear hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number
port-set port-pipe
Parameters
stack-unit stack-
unit-number
port-set port-pipe
Command Modes
EXEC
EXEC Privilege
Command History
Version
9.10(0.0)
Related Commands
pfc-nodrop-priority l2-dlf drop
show hardware pfc-nodrop-priority
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
Syntax clear pfc counters [interface-type | stack-unit {unit number | all } all stack-
ports all}]
Parameters
port-type
stack-unit unit
number
all stack-ports all
statistics
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
Enter the keywords stack-unit and the stack unit number.
Enter the keywords port-set and port-pipe number. The port-pipe number is 0.
Description
Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
— configures to drop the unknown unicast packets flooding on lossless priorities.
— displays the packets drop count corresponding to the priority.
Enter the keywords port-type then the interface information. Enter the subport
number if a 40G port is fanned-out into 10G ports.
Enter the keywords stack-unit then the stack-unit number to be cleared.
Enter the keywords all stack-ports all to clear the counters on all interfaces.
Enter the keyboard statistics to clear the hardware PFC counters.
Description
Introduced on the S6100-ON.
Data Center Bridging (DCB) 477