Show Interface Pfc Statistics - Dell S6100 Configuration Manual

show interface pfc statistics

Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax show interface port-type pfc statistics
Parameters
port-type
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.16.0
Usage Information
You can use this command even without enabling DCB.
Example (Summary)
Dell#show interfaces tengigabitethernet
Interface TenGigabitEthernet 1/1/3/2
Interface
----------------------------------------------------------------------
Te 1/1/3/2
Te 1/1/3/2
Te 1/1/3/2
Te 1/1/3/2
Te 1/1/3/2
Enter the port type and the interface information.
NOTE: This command also enables you to view information corresponding to a range of ports. However,
for Open Networking (ON) platforms the notation for specifying port range in the command is different
from how you specify in non-ON platforms.
• For non-ON platforms, you can specify multiple ports as slot/port-range. For example, if you want
to display information corresponding to all ports between 1 and 4, specify the port range as show
interfaces interface-type 1/1 - 4.
• For ON platforms, you can specify multiple ports as slot/port/[subport] - slot/port/
[subport]. For example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as show interfaces interface-type 1/1/1 - 1/1/4.
Description
Enabled to display the command output even without enabling DCB. Introduced on the
S6100–ON.
Added support to display the interface configurations corresponding to a range of ports.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the MXL 10/40GbE Switch IO Module.
Priority Rx XOFF Frames
P0 0
P1 0
P2 0
P3 0
P4 0
1/1/3/2 pfc statistics
Rx Total Frames Tx Total Frames
0 0
0 0
0 0
0 0
0 0
Data Center Bridging (DCB) 485