Switchport Mode Private-Vlan - Dell S6100 Configuration Manual

Version
8.3.7.0
7.8.1.0
Usage Information The list of secondary VLANs can be:
•
•
•
Related Commands
•
•

switchport mode private-vlan

Set PVLAN mode of the selected port.
Syntax [no] switchport mode private-vlan {host | promiscuous | trunk}
To remove PVLAN mode from the selected port, use the no switchport mode private-vlan command.
Parameters
host
promiscuous
trunk
Defaults Disabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
1238 Private VLAN (PVLAN)
Description
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Specified in comma-delimited or hyphenated-range format.
Specified with this command even before they have been created.
Amended by specifying the new secondary VLAN to be added to the list.
private-vlan mode — sets the mode of the selected VLAN to community, isolated, or primary.
switchport mode private-vlan
Enter the keyword host to configure the selected port or port channel as an isolated
interface in a PVLAN.
Enter the keyword promiscuous to configure the selected port or port channel as an
promiscuous interface.
Enter the keyword trunk to configure the selected port or port channel as a trunk port
in a PVLAN.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
— sets PVLAN mode of the selected port.