Ipv6 Ospf Hello-Interval - Dell S6100 Configuration Manual

ipv6 ospf hello-interval

Specify the time interval between the hello packets sent on the interface.
Syntax ipv6 ospf hello—interval seconds
To return to the default time interval, enter no ipv6 ospf hello—interval.
Parameters
seconds
Defaults 10 seconds (Ethernet).
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.2(1.0)
9.1.(0.0)
7.8.1.0
7.4.1.0
8.3.19.0
Usage Information
The time interval between hello packets must be the same for routers in a network.
Related Commands
•
Enter the time interval in seconds as the time between hello packets. The range is from 1
to 65525 seconds.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced on the S4810 and Z9000.
Added support for the C-Series.
Introduced on the E-Series.
Introduced on the S4820T.
ipv6 ospf dead-interval – specify the time interval between hello packets was received from a router.
Open Shortest Path First (OSPFv2 and OSPFv3) 1167