Dell S6100 Configuration Manual page 483

Field Description
Interface Interface type with stack-unit and port number.
Admin mode is on PFC admin mode is on or off with a list of the configured PFC priorities. When the PFC
Admin is enabled admin mode is on, PFC advertisements are enabled to be sent and received from peers;
received PFC configuration take effect. The admin operational status for a DCBX
exchange of PFC configuration is enabled or disabled.
Remote is enabled, Operational status (enabled or disabled) of peer device for DCBX exchange of PFC
Priority list Remote configuration with a list of the configured PFC priorities. Willing status of peer device for
Willing Status is DCBX exchange (Willing bit received in PFC TLV): enabled or disable.
enabled
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured PFC priorities.
Operational status Port state for current operational PFC configuration:
(local port)
•
•
•
PFC DCBX Oper Operational status for the exchange of the PFC configuration on the local port: match
status (up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of the PFC parameters: Feature — for
legacy DCBX versions; Symmetric — for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority Status of FCoE advertisements in application priority TLVs from the local DCBX port:
TLV: FCOE TLV Tx enabled or disabled.
Status
Application Priority Status of ISCSI advertisements in application priority TLVs from the local DCBX port:
TLV: SCSI TLV Tx enabled or disabled.
Status
Application Priority Priority bitmap the local DCBX port uses in FCoE advertisements in application priority
TLV: Local FCOE TLVs.
Priority Map
Application Priority Priority bitmap the local DCBX port uses in ISCSI advertisements in application priority
TLV: Local ISCSI TLVs.
Priority Map
Application Priority Status of FCoE advertisements in application priority TLVs from the remote peer port:
TLV: Remote FCOE enabled or disabled.
Priority Map
Application Priority Status of iSCSI advertisements in application priority TLVs from the remote peer port:
TLV: Remote ISCSI enabled or disabled.
Priority Map
PFC TLV Statistics: Number of PFC TLVs received.
Input TLV pkts
PFC TLV Statistics: Number of PFC TLVs transmitted.
Output TLV pkts
Init: Local PFC configuration parameters were exchanged with the peer.
Recommend: Remote PFC configuration parameters were received from the peer.
Internally propagated: PFC configuration parameters were received from the
configuration source.
Data Center Bridging (DCB) 483