Ipv6 Dhcp Snooping Vlan - Dell S6100 Configuration Manual

Version
9.7(0.0)

ipv6 dhcp snooping vlan

Enable ipv6 DHCP Snooping on VLAN or range of VLANs.
Syntax [no] ip dhcp snooping vlan vlan-id
To disable the ipv6 dhcp snooping on VLAN basis or range of VLAN, use the no ipv6 dhcp snooping vlan
<vlan-id> command.
Parameters
vlan-id
Defaults Disabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax [no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address
interface interface-type lease number
Parameters
mac address
vlan-id vlan-id
ip ip-address
interface type
Description
Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
Enter the name of a VLAN id or list of the VLANs to enable DHCP Snooping.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820T, S6000, S6000-ON, and Z-Series.
Enter the keyword mac then the MAC address of the host to which the server is leasing
the IP address.
Enter the keywords vlan-id then the VLAN to which the host belongs. The range is
from 2 to 4094.
Enter the keyword ip then the IP address that the server is leasing.
Enter the keyword interface then the type of interface to which the host is
connected:
Dynamic Host Configuration Protocol (DHCP) 563