Dell S6100 Configuration Manual page 278

To remove a set level condition, use the no set level {backbone | level-1 | level-1-2 |
level-2 | stub-area} command.
Parameters
backbone
level-1
level-1-2
level-2
stub-area
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Dell Networking OS Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Related Commands
•
•
•
•
278 Access Control Lists (ACL)
Enter the keyword backbone to redistribute matched routes to the OSPF backbone area
(area 0.0.0.0).
Enter the keyword level-1 to redistribute matched routes to IS-IS Level 1.
Enter the keyword level-1-2 to redistribute matched routes to IS-IS Level 1 and Level
2.
Enter the keyword level-2 to redistribute matched routes to IS-IS Level 2.
Enter the keyword stub to redistributed matched routes to OSPF stub areas.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
set automatic-tag — compute the tag value of the route.
set metric — specify the metric value assigned to redistributed routes.
set metric-type — specify the metric type assigned to redistributed routes.
set tag — specify the tag assigned to redistributed routes.