Service-Policy Rate-Limit-Protocols - Dell S6100 Configuration Manual

Parameters
policy-name
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.8.0
Usage Information
Create a policy-map by associating a queue number with the qos-policy.
Create QoS policies prior to enabling this command.
For CoPP, use the keyword cpu-qos when creating qos-policy-input.
Related Commands
•
•

service-policy rate-limit-protocols

Apply a policy for the system to rate limit control protocols on a per-protocol basis.
Syntax service-policy rate-limit-protocols policy-name
Parameters
policy-name
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
468 Control Plane Policing (CoPP)
Enter the service-policy name, using a string up to 32 characters.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
qos-policy-input — create a QoS input policy map.
policy-map-input — create an input policy map.
Enter the service-policy name, using a string up to 32 characters.