Dell S6100 Configuration Manual page 714

stack-unit unit-id
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.9(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.5.1.0
8.2.1.0
8.1.1.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Usage Information The following describes the show interfaces switchport command for the following example.
Items
Name
714 Interfaces
• For physical interfaces, you can specify multiple ports as slot/port-range. For
example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as show interfaces interface-type 1/1 - 4.
• For port–channel interfaces, you can specify multiple ports as port-range. For
example, if you want to display information corresponding to all ports between 1 and 4,
specify the port range as show interfaces port—channel 1 - 4.
(OPTIONAL) Enter the keywords stack-unit then the stack member number.
EXEC
EXEC Privilege
Description
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the S6100–ON.
Added support to display the interface configurations corresponding to a range of ports.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for 4-port 40G line cards on the E-Series.
Added support for 4093 VLANs on E-Series.
Introduced on the E-Series.
Support added for hybrid port/native VLAN, introduced on the S-Series.
Introduced on the C-Series.
Description
Displays the interface's type, slot/port number.