Show Hardware Pfc-Nodrop-Priority - Dell S6100 Configuration Manual

Usage Information Specify a stack-unit number on the Master switch in a stack.
Example
Dell#show dcb
DCB Status: Enabled, PFC Queue Count: 2
Total Buffer:
PFC Total Buffer:
PFC Shared Buffer:
PFC Headroom Buffer:
PFC Available Buffer: Current buffer available for new lossless queues to be
stack-unit Total Buffer PFC Total Buffer PFC Shared Buffer PFC Headroom Buffer PFC Available Buffer
-----------------------------------------------------------------------------------------------------
1
1
1
1
Dell#

show hardware pfc-nodrop-priority

View the packets drop count corresponding to the priority.
Syntax show hardware pfc-nodrop-priority l2-dlf drops stack-unit stack-unit-number
port-set port-pipe
Parameters
stack-unit stack-
unit-number
port-set port-pipe
Command Modes
EXEC
EXEC Privilege
Command History
Version
9.10(0.0)
Example
Dell#show hardware pfc-nodrop-priority l2-dlf drops stack-unit 1 port-set 0
---------------------------------------------------
---------------------------------------------------
Related Commands pfc-nodrop-priority l2-dlf drop
Total available buffer excluding the buffer pre-allocated
for guaranteed services like global headroom, queue's min
guaranteed buffer and CPU queues.
Maximum buffer available for lossless queues.
Buffer used by ingress priority groups for shared usage.
Buffer used by ingress priority group for shared headroom usage.
Provisioned.
PP (KB)
0.0 3399 2656
0.1 3399 2656
0.2 3399 2656
0.3 3399 2656
Enter the keywords stack-unit and the stack unit number.
Enter the keywords port-set and port-pipe number. The port-pipe number is 0.
Description
Introduced on the C9010, S6000, S6000–ON, Z9100–ON and S6100–ON.
Priority
0
1
2
3
4
5
6
7
— configures to drop the unknown unicast packets flooding on lossless priorities.
(KB) (KB)
1040 1040
1040 1040
1040 1040
1040 1040
DropCount
0
0
0
0
0
0
0
0
(KB) (KB)
567
576
567
576
Data Center Bridging (DCB) 481