Bgp Bestpath As-Path Multipath-Relax - Dell S6100 Configuration Manual

Version
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information If you enable this command, use the clear ip bgp * command to recompute the best path.

bgp bestpath as-path multipath-relax

Include prefixes received from different AS paths during multipath calculation.
Syntax bgp bestpath as-path multipath-relax
To return to the default BGP routing process, use the no bgp bestpath as-path multipath-relax
command.
Defaults Disabled
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.4
8.3.7.0
Usage Information The bestpath router bgp configuration mode command changes the default bestpath selection
algorithm. The multipath-relax option allows load-sharing across providers with different (but equal-length)
autonomous system paths. Without this option, ECMP expects the AS paths to be identical for load-sharing.
344 Border Gateway Protocol
Description
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Description
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.