Description - Dell S6100 Configuration Manual

description

Add a description to this route map.
Syntax description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults None
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
pre-7.7.1.0
Related Commands
•
match as-path
To match routes that have a certain AS number in their BGP path, configure a filter.
Syntax match as-path as-path-name
To delete a match AS path filter, use the no match as-path as-path-name command.
Parameters
as-path-name
Defaults Not configured.
262 Access Control Lists (ACL)
Enter a description to identify the route map (80 characters maximum).
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced.
route-map — enable a route map.
Enter the name of an established AS-PATH ACL, up to 140 characters.