Dell S6100 Configuration Manual page 695

Version
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
Usage Information
The following describes the interface command shown in the following example. This example sets a port as
hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the
native VLAN of the port. The port now accepts:
•
•
The following describes the do show interfaces command shown in the following example. This example
shows output with "Hybrid" as the newly added value for 802.1QTagged. The options for this field are:
•
•
•
The following describes the interface vlan command shown in the following example. This example shows
unconfiguration of the hybrid port using the no portmode hybrid command.
Example
Dell(conf)# interface tengigabitethernet 1/1/1/1
Dell(conf-if-te-1/1/1/1)# portmode hybrid
Dell(conf-if-te-1/1/1/1)# interface vlan 10
Dell(conf-if-vl-10)# untagged tengigabitethernet 1/1/1/1
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# tagged tengigabitethernet 1/1/1/1
Dell(conf-if-vl-20)#
Example
Dell(conf-if-vl-20)# do show interfaces switchport
Name: TenGigabitEthernet 1/1/1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan
Native
Dell(conf-if-vl-20)#
Example (Vlan)
Dell(conf-if-vl-20)# interface vlan 10
Dell(conf-if-vl-10)# no untagged tengigabitethernet 1/1/1/1
Dell(conf-if-vl-10)# interface vlan 20
Dell(conf-if-vl-20)# no tagged tengigabitethernet 1/1/1/1
Dell(conf-if-vl-20)# interface tengigabitethernet 1/1/1/1
Dell(conf-if-te-1/1/1/1)# no portmode hybrid
Dell(conf-if-vl-20)#
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
untagged frames and classify them as VLAN 10 frames
VLAN 20 tagged frames
True — port is tagged
False — port is untagged
Hybrid — port accepts both tagged and untagged frames
NOTE: Remove all other configurations on the port before you can remove the hybrid configuration
from the port.
10, Vlan 20
VlanId: 10
Interfaces 695