Debug Ipv6 Nd Ra–Guard - Dell S6100 Configuration Manual

Version
9.8(0.0P2)
9.5(0.1)
8.3.19.0
8.3.11.1
8.3.7.1
debug ipv6 nd ra–guard
Enable debugging for IPv6 RA guard snooping information.
Syntax debug ipv6 nd ra-guard [interface_type slot/port | count value]
Parameters
interface_type slot/
port
count value
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
Description
Introduced on the S3048-ON.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Enter the one of the following interfaces and slot/port information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Enter the keyword count then the number of debug outputs. The range is from 1 to
65534. The default is infinity.
Description
Introduced on the C9010.
Introduced on the S6100-ON.
Introduced on the Z9500.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9000 switches.
Neighbor Discovery Protocol (NDP) 1029