The Dell Networking OS implementation of per-VLAN spanning tree plus (PVST+) is based on the IEEE 802.1w standard spanning tree
protocol.
Dell Networking OS supports PVST+ on the platform.
NOTE:
For easier command line entry, the plus (+) sign is not used at the command line.
Topics:
•
description
•
disable
•
extend system-id
•
protocol spanning-tree pvst
•
show spanning-tree pvst
•
spanning-tree pvst
•
spanning-tree pvst err-disable
•
tc-flush-standard
•
vlan bridge-priority
•
vlan forward-delay
•
vlan hello-time
•
vlan max-age
description
Enter a description of the PVST+.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description
Defaults
none
Command Modes
SPANNING TREE PVST+ (The prompt is "config-pvst".)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
1240
Per-VLAN Spanning Tree Plus (PVST+)
Per-VLAN Spanning Tree Plus (PVST+)
Enter a description to identify the spanning tree (80 characters maximum).
41