Ipv6 Router Isis - Dell S6100 Configuration Manual

Related Commands
•
•

ipv6 router isis

Enable the IPv6 IS-IS routing protocol and specify an IPv6 IS-IS process.
Syntax ipv6 router isis [tag]
To disable IS-IS routing, use the no router isis [tag] command.
Parameters
tag
Defaults Not configured.
Command Modes ROUTER ISIS
Command History s
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
7.5.1.0
Usage Information
Configure a network entity title (the net command) to specify the area address and the router system ID.
To establish adjacencies and establish dynamic routing, enable routing on one or more interfaces.
You can configure only one IS-IS routing process to perform Level 2 routing. A level-1-2 designation performs
Level 1 and Level 2 routing at the same time.
Related Commands
•
•
862 Intermediate System to Intermediate System (IS-IS)
NOTE: IP address is not mandatory for forming IS-IS adjacency.
net — configure an IS-IS network entity title (NET) for the routing process.
router isis — enable the IS-IS routing protocol.
(OPTIONAL) This parameter is a unique name for a routing process. A null tag is assumed
if the tag option is not specified. The tag name must be unique for all IP router processes
for a given router.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
net — configure an IS-IS network entity title (NET) for the routing process.
is-type — assign a type for a given area.