Show Ip Ospf Routes - Dell S6100 Configuration Manual

20.20.20.1
Dell#

show ip ospf routes

Display routes OSPF calculates and stores in OSPF RIB.
Syntax show ip ospf [process-id | vrf vrf-name ] routes
Parameters
process-id
vrf vrf-name
Defaults None
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
Usage Information
This command is useful in isolating routing problems between the OSPF and the RTM. For example, if a route is
missing from the RTM/FIB but is visible from the display output of this command, the problem is with downloading
the route to the RTM.
1 FULL/DROTHER00:00:36 192.10.10.4 Te 1/1/3/1 0.0.0.1
Enter the OSPF Process ID to show a specific process. If no Process ID is entered,
command applies only to the first OSPF process.
Enter the keyword vrf followed by the name of the VRF to show the OSPF RIB
information corresponding to the OSPF processes that are tied to a specific VRF.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series and E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1137