Area Nssa - Dell S6100 Configuration Manual

Defaults cost = 1; no areas are configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
pre- 6.1.1.1
Usage Information In the Dell Networking operating software (OS), cost is defined as reference bandwidth/bandwidth.
Related Commands
•

area nssa

Specify an area as a not so stubby area (NSSA).
Syntax area area-id nssa [default-information-originate] [no-redistribution] [no-
summary]
To delete an NSSA, use the no area area-id nssa command.
Parameters
area-id
no-redistribution
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
area stub — create a stub area.
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
(OPTIONAL) Specify that the redistribute command does not distribute routes into
the NSSA. Only use this command in an NSSA area border router (ABR).
Open Shortest Path First (OSPFv2 and OSPFv3) 1067