Show Interfaces Transceiver - Dell S6100 Configuration Manual

Items
802.1QTagged
Vlan membership
Example
Dell# show interfaces switchport
Name: TenGigabitEthernet 1/1/1/1
802.1QTagged: Hybrid
Vlan membership:
Vlan
Native VlanId: 20
Name: TenGigabitEthernet 1/1/2/1
802.1QTagged: True
Vlan membership:
Vlan
Name: TenGigabitEthernet 1/1/3/1
802.1QTagged: True
Vlan membership:
Vlan
Name: TenGigabitEthernet 1/1/4/1
802.1QTagged: True
Vlan membership:
Vlan
--More--
Related Commands
•
•
•

show interfaces transceiver

Display the details of an installed transceiver.
Syntax show interfaces [interface number] transceiver
Parameters
interfaces interface
number
Description
Displays whether if the VLAN tagged ("True"), untagged ("False"), or hybrid ("Hybrid"),
which supports both untagged and tagged VLANs by the port.
Lists the VLANs to which the interface is a member. Starting with Dell Networking OS
version 7.6.1, this field can display native VLAN membership by the port.
2, Vlan 20
2
2
2
interface — configure a physical interface on the switch.
show ip interface — display Layer 3 information about the interfaces.
show interfaces transceiver
output also displays the transceiver's serial number.
(OPTIONAL) Enter one of the following keywords and then the interface information:
• For a port channel interface, enter the keywords port-channel then a number.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
— display the physical status and operational status of an installed transceiver. The
Interfaces 715