Hash-Algorithm - Dell S6100 Configuration Manual

Defaults Off
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
9.0.0.0
8.3.19.0
8.3.10.0
Usage Information
Using CONFIGURATION mode, create an ECMP group ID. You can then assign interfaces to the ECMP group
using CONFIGURATION ECMP-GROUP mode. You can also enable on the port-channel configuration using the
CONFIGURATION ECMP-GROUP command mode.

hash-algorithm

Changes the hash algorithm used to distribute traffic flows across a Port Channel and ECMP. The ECMP and LAG options are supported
on the S-Series and Z-Series.
Syntax hash-algorithm {ecmp {crc16 | crc16cc | crc32MSB | crc32LSB | crc-upper | dest-
ip | flow-based-hashing {crc16|crc16cc|crc32MSB|crc32LSB|xor1|xor2|xor4|xor8|
xor16}|lsb | xor1 | xor2 | xor4 | xor8 | xor16}[[hg {crc16 | crc16cc | crc32MSB
| crc32LSB | xor1 | xor2 | xor4 | xor8 | xor16}]| [lag {crc16 | crc16cc |
crc32MSB | crc32LSB | xor1 | xor2 | xor4 | xor8 | xor16 }][stack-unit|linecard
number | port-set number] | [hg—seed value] | [seedvalue]
To return to the default hash algorithm, use the no hash-algorithm command.
To return to the default ECMP hash algorithm, use the no hash-algorithm ecmp algorithm-value command.
Parameters
ecmp crc16 |
crc16cc |
CONFIGURATION
CONFIGURATION ECMP-GROUP
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Enter the keyword ecmp then one of the following options:
• crc16: Use CRC16_BISYNC — 16 bit CRC16-bisync polynomial (default)
• crc16cc: Use CRC16_CCITT — 16 bit CRC16 using CRC16-CCITT polynomial
Equal Cost Multi-Path (ECMP) 583