Debug Lldp Interface - Dell S6100 Configuration Manual

debug lldp interface

To display timer events, neighbor additions or deletions, and other information about incoming and outgoing packets, enable LLDP
debugging.
Syntax debug lldp interface {interface | all}{events | packet {brief | detail} {tx |
rx | both}}
To disable debugging, use the no debug lldp [interface {interface | all}{events} {packet
{brief | detail} {tx | rx | both}}] command.
Parameters
interface interface
all
events
packet
brief
detail
tx
rx
both
Defaults None
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
960 Link Layer Discovery Protocol (LLDP)
Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Enter the keyword all to display information on all interfaces.
Enter the keyword events to display major events such as timer events.
Enter the keyword packet to display information regarding packets coming in or going
out.
Enter the keyword brief to display brief packet information.
Enter the keyword detail to display detailed packet information.
Enter the keyword tx to display transmit-only packet information.
Enter the keyword rx to display receive-only packet information.
Enter the keyword both to display both receive and transmit packet information.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.