Show Arp Retries - Dell S6100 Configuration Manual

Description
Total Entries
Static Entries
Dynamic Entries
CPU
Example (Summary) Dell# show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
83
Dell#
Related Commands
•
•

show arp retries

Display the configured number of ARP retries.
Syntax show arp retries
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.1.0
Lists the total number of ARP entries in the ARP table.
Lists the total number of configured or static ARP entries.
Lists the total number of learned or dynamic ARP entries.
Lists which CPU the entries are stored on.
0
ip local-proxy-arp — enable/disable Layer 3 communication in secondary VLANs.
switchport mode private-vlan
EXEC
EXEC Privilege
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced.
83
— set PVLAN mode of the selected port.
CP
IPv4 Routing 787