Clear Fip-Snooping Statistics - Dell S6100 Configuration Manual

clear fip-snooping statistics

Clears the statistics on the FIP packets snooped on all VLANs, a specified VLAN, or a specified port interface.
Syntax clear fip-snooping statistics [interface vlan vlan-id | interface port-type
slot/port[/subport] | interface port-channel port-channel-number]
Parameters
vlan-id
port-type slot/port
port-
channelnumber
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0)
9.7(0.0)
8.3.19.0
8.3.12.0
debug fip snooping
Enable debugging on FIP snooping.
Syntax debug fip-snooping [all | acl | error | ifm | info | ipc | ns | rscn | rx | tx]
Parameters
all
acl
error
ifm
info
596 FIP Snooping
Enter the VLAN ID of the FIP packet statistics to be cleared.
Enter the slot number and port-type of the FIP packet statistics to be cleared.
Enter the port channel number of the FIP packet statistics to be cleared.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S3048-ON and S4048-ON.
Introduced on the Z9500 and S6000-ON.
Introduced on the S4820T.
Introduced on the S4810.
Enter the keyword all to enable debugging on all the options.
Enter the keyword acl for ACL-specific debugging.
Enter the keyword error for error-specific debugging.
Enter the keyword ifm for IFM-specific debugging.
Enter the keyword info for information-specific debugging.