Debug Isis Spf-Triggers - Dell S6100 Configuration Manual

Version
8.3.12.0
6.3.1.0

debug isis spf-triggers

Enable debugging on the events that triggered IS-IS shortest path first (SPF) events for debugging purposes.
Syntax debug isis [vrf vrf-name] spf-triggers
To turn off debugging, use the no debug isis [vrf vrf-name] spf-triggers command.
Parameters
vrf vrf-name
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
6.3.1.0
Description
Introduced on the S4810.
Introduced.
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to enable
debugging information on IS-IS corresponding to that VRF. This information contains SPF
trigger detail tied to the VRF that you specify. When SPF is triggered, this debugging
information is displayed.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced.
Intermediate System to Intermediate System (IS-IS) 845