Route-Map - Dell S6100 Configuration Manual

Version
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Related Commands
•
•
•
•
•
•

route-map

Enable a route map statement and configure its action and sequence number. This command also places you in ROUTE-MAP mode.
Syntax route-map map-name [permit | deny] [sequence-number]
To delete a route map, use the no route-map map-name [permit | deny] [sequence-number]
command.
Parameters
map-name
permit
deny
sequence-number
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit action is the default.
Command Modes CONFIGURATION
272 Access Control Lists (ACL)
Description
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
match interface — redistribute routes that match the next-hop interface.
match ip address — redistribute routes that match an IP address.
match ip next-hop — redistribute routes that match the next-hop IP address.
match ip route-source — redistribute routes that match routes advertised by other routers.
match metric — redistribute routes that match a specific metric.
match route-type — redistribute routes that match a route type.
Enter a text string of up to 140 characters to name the route map for easy identification.
(OPTIONAL) Enter the keyword permit to set the route map default as permit. If you do
not specify a keyword, the default is permit.
(OPTIONAL) Enter the keyword deny to set the route map default as deny.
(OPTIONAL) Enter a number to identify the route map for editing and sequencing with
other route maps. You are prompted for a sequence number if there are multiple instances
of the route map. The range is from 1 to 65535.