Show Isis Neighbors - Dell S6100 Configuration Manual

TenGigabitEthernet 1/1/2/1 is up, line protocol is up
--More--

show isis neighbors

Display information about neighboring (adjacent) routers.
Syntax show isis [vrf vrf-name] neighbors [level-1 | level-2] [detail] [interface]
Parameters
vrf vrf-name
level-1
level-2
detail
interface
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
896 Intermediate System to Intermediate System (IS-IS)
Number of active level-2 adjacencies: 1
Next IS-IS LAN Level-1 Hello in 2 seconds
Next IS-IS LAN Level-2 Hello in 1 seconds
LSP Interval: 33
MTU 1497, Encapsulation SAP
Routing Protocol: IS-IS
Circuit Type: Level-1-2
Interface Index 38371358, Local circuit ID 2
Level-1 Metric: 10, Priority: 64, Circuit ID: systest-3.02
Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
Number of active level-1 adjacencies: 1
Level-2 Metric: 10, Priority: 64, Circuit ID: systest-3.02
Hello Interval: 10, Hello Multiplier: 3, CSNP Interval: 10
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to display adjacent
router information corresponding to that VRF.
(OPTIONAL) Displays information about Level 1 IS-IS neighbors.
(OPTIONAL) Displays information about Level 2 IS-IS neighbors.
(OPTIONAL) Displays detailed information about neighbors.
(OPTIONAL) Enter the following keywords and the interface information:
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the stack/slot/port/subport information.
• For a 25-Gigabit Ethernet interface, enter the keyword twentyFiveGigE then the
stack/slot/port/subport information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the stack/
slot/port[/subport] information.
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
• For a port channel interface, enter the keywords port-channel then a number.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
EXEC
EXEC Privilege