Show Ip Bgp - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Example
Dell(conf-router_bgp)# show config
!
router bgp 100
network 1.1.11.1/32
network 1.1.12.1/32
network 1.1.13.1/32
neighbor 10.1.1.2 remote-as 200
neighbor 10.1.1.2 no shutdown
Dell(conf-router_bgp)#

show ip bgp

View the current BGP IPv4 routing table for the system.
Syntax show ip bgp [vrf vrf-name] [ipv4 unicast] [network [network-mask] [longer-
prefixes]]
Parameters
ipv4 unicast
network
network-mask
longer-prefixes
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the keywords ipv4 unicast to view information only related to
ipv4 unicast routes.
(OPTIONAL) Enter the network address (in dotted decimal format) of the BGP network
to view information only on that network.
(OPTIONAL) Enter the network mask (in slash prefix format) of the BGP network
address.
(OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common
prefix.
Border Gateway Protocol 415