Mac Learning-Limit Station-Move-Violation - Dell S6100 Configuration Manual

mac learning-limit station-move-violation

Specify the actions for a station move violation.
Syntax mac learning-limit station-move-violation {log | shutdown-both | shutdown-
offending | shutdown-original}
To disable a configuration, use the no mac learning-limit station-move-violation command, then
the configured keyword.
Parameters
log
shutdown-both
shutdown-offending Enter the keywords shutdown-offending to shut down the offending interface and
shutdown-original
Defaults None
Command Modes INTERFACE (conf-if-interface-slot/port)
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.8.1.0
7.5.1.0
Usage Information This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Enter the keyword log to generate a syslog message on a station move violation.
Enter the keyword shutdown to shut down both the original and offending interface and
generate a syslog message.
generate a syslog message.
Enter the keywords shutdown-original to shut down the original interface and
generate a syslog message.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Layer 2 927