Version
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
graceful-restart t2
Configure the wait time for the graceful restart timer T2 that a restarting router uses as the wait time for each database to synchronize.
Syntax
graceful-restart t2 {level-1 | level-2} seconds
To return to the default, use the no graceful-restart t2 command.
Parameters
level-1, level-2
seconds
Defaults
30 seconds
Command Modes
ROUTER ISIS
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Enter the keywords level-1 or level-2 to identify the database instance type to
which the wait interval applies.
Enter the gracefule-restart t2 time in seconds. The range is from 5 to 120
seconds. The default is 30 seconds.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
Intermediate System to Intermediate System (IS-IS)
857