Graceful-Restart Helper-Reject - Dell S6100 Configuration Manual

Version
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.5.1.0
pre- 6.1.1.1
Usage Information The Helper mode is enabled by default on the device. To enable the restart mode also on the device, you must
configure the grace period using this command. After you enable restart mode the router advertises the neighbor
as fully adjacent during a restart.

graceful-restart helper-reject

Specify the OSPF router to not act as a helper during graceful restart.
Syntax graceful-restart helper-reject ip-address
To return to default value, use the no graceful-restart helper-reject command.
Parameters
ip-address
Defaults Not configured.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
1086 Open Shortest Path First (OSPFv2 and OSPFv3)
Description
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series. Added support for Multi-Process OSPF.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the OSPF router-id, in IP address format, of the restart router that will not act as a
helper during graceful restart.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.