Dell S6100 Configuration Manual page 735

Version
9.10(0.0)
9.9(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
E-Series legacy
command
Usage Information The following describes the show interfaces port-channel command shown in the following example.
Field
Port-Channel 1...
Hardware is...
Port-channel is
part...
Internet address...
MTU 1554...
LineSpeed
Members in this...
ARP type:...
Last clearing...
Queueing strategy.
packets input...
Input 0 IP packets...
Description
Increased the number of port channels to 4096. Introduced on the S6100–ON.
Added support to display the interface configurations corresponding to a range of ports.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series. Modified to display the LAG failover group status.
Introduced on the C-Series.
Description
Displays the LAG's status. In the Example, the status of the LAG's LAG fate-sharing
group ("Failover-group") is listed.
Displays the interface's hardware information and its assigned MAC address.
Indicates whether the LAG is part of a LAG fate-sharing group ("Failover-group").
States whether an IP address is assigned to the interface. If an IP address is assigned,
that address is displayed.
Displays link and IP MTU.
Displays the interface's line speed. For a port channel interface, it is the line speed of the
interfaces in the port channel.
Displays the interfaces belonging to this port channel.
Displays the ARP type and the ARP timeout value for the interface.
Displays the time when the show interfaces counters were cleared.
States the packet queuing strategy. FIFO means first in first out.
Displays the number of packets and bytes into the interface.
Displays the number of packets with IP headers, VLAN tagged headers, and MPLS
headers. The number of packets may not add correctly because a VLAN tagged IP packet
counts as both a VLAN packet and an IP packet.
Interfaces 735