Mac Learning-Limit - Dell S6100 Configuration Manual

To disable the ARP refresh feature, use the no mac-address-table station-move refresh-arp
command.
Defaults Enabled
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.9(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
7.6.1.0
7.4.1.0
8.3.7.0
7.7.1.0
Usage Information For more information about using this command, see NIC Teaming in the Layer 2 section of the Dell Networking
OS Configuration Guide.

mac learning-limit

Limit the maximum number of MAC addresses (static + dynamic) learned on a selected interface.
Syntax mac learning-limit address_limit [vlan vlan-id] [station-move-violation
[dynamic]] [dynamic [no-station-move| station-move]]
Parameters
address_limit
vlan vlan-id
dynamic
Description
Introduced on the S6100–ON.
Modified the default option from none to Enabled.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the C-Series.
Introduced on the E-Series.
Introduced on the S4810.
Introduced on the S-Series.
Enter the maximum number of MAC addresses that can be learned on the interface. The
range is from 1 to 1000000.
Enter the keyword then the VLAN ID. The range is from 1 to 4094.
(OPTIONAL) Enter the keyword dynamic to allow aging of MACs even though a
learning limit is configured.
Layer 2 923