Load-Balance Hg - Dell S6100 Configuration Manual

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.10.0
8.3.7.0
7.6.1.0
7.5.1.0
Usage Information By default, Dell Networking OS distributes incoming traffic based on a hash algorithm using the following criteria:
•
•
•
•

load-balance hg

Choose the traffic flow parameters the hash calculation uses while distributing the traffic across internal higig links.
Syntax [no] load-balance hg {ip-selection | ipv6-selection [source-ip | source-ipv6 |
source-port-id | source-module-id | dest-ip | dest-ipv6 | dest-port-id | dest-
module-id | protocol | vlan | L4-source-port | L4-dest-port ] | mac [source-mac
| source-port-id | source-module-id | dest-mac | dest-port-id | dest-module-id
| vlan | ethertype | source-dest-mac ] | tunnel [ipv4-over-ipv4 | ipv4-over-
gre-ipv4 | mac-in-mac]}
Parameters
{{ip-selection| ipv6-
selection [source-ip
| source-ipv6 |
source-port-id |
source-module-id |
dest-ip | dest-ipv6 |
dest-port-id | dest-
module-id | protocol
| vlan | L4-source-
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added the ingress-port parameter for the S4810.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
IP source address
IP destination address
TCP/UDP source port
TCP/UDP destination port
To use IPv4 key fields in hash computation, enter the keyword ip-selection then one
of the parameters. To use IPv6 key fields in hash computation, enter the keyword ipv6-
selection then one of the parameters.
• source-ip — Use IPv4 src-ip field in hash calculation.
• source-ipv6 — Use IPv6 src-ip field in hash calculation
• source-port-id — Use src-port-id field in hash calculation.
• source-module-id — Use src-module-id field in hash calculation.
• dest-ip — Use IPv4 dest-ip field in hash calculation.
• dest-ipv6 — Use IPv6 dest-ip field in hash calculation
IPv4 Routing 781