Test Cam-Usage - Dell S6100 Configuration Manual

Field
Available CAM
Example
Dell#show cam-usage
Stackunit|Portpipe| CAM Partition
=========|========|====================|===========|==========|==============
0
Example (show
Dell#show cam-usage router
cam-usage router) Stackunit|Portpipe| CAM Partition
========|========|=================|=============|=============|==============

test cam-usage

Verify that enough CAM space is available for the IPv6 ACLs you have created.
Syntax test cam-usage service-policy input input policy name stack-unit {number | all}
Parameters
policy-map name
number
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
| 0 | IN-L2 ACL
| | IN-L3 ACL
| | IN-L3 FIB
| | IN-L3 ECMP GRP
| | IN-V6 ACL
| | IN-NLB ACL
| | IPMAC ACL
| | OUT-L2 ACL
| | OUT-L3 ACL
| | OUT-V6 ACL
0 | 0 | IN-L3 ACL
| | IN-L3 ECMP GRP
| | IN-V6 ACL
| | IN-L3-MIRR ACL
| | IN-L3 FIB
Enter the name of the policy-map to verify. Maximum is 32 characters.
Enter all to get information for all the stack-units or enter the stack-unit number to get
information for a specific stack-unit.
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Description
Amount of CAM space that is free and remaining to be
allocated for ACLs
| Total CAM | Used CAM |Available CAM
| 1024 |
| 1024 |
| 163840 |
| 2048 |
| 0 |
| 0 |
| 0 |
| 206 |
| 102 |
| 102 |
| Total CAM | Used CAM
| 1024 |
| 2048 |
| 0 |
| 0 |
| 163840 |
Content Addressable Memory (CAM)
0 | 1024
1 | 1023
16 | 163824
0 | 2048
0 | 0
0 | 0
0 | 0
9 | 197
9 | 93
4 | 98
|Available CAM
1 | 1023
0 | 2048
0 | 0
0 | 0
15 | 163825
459