Default-Metric - Dell S6100 Configuration Manual

Version
7.8.1.0
7.6.1.0
7.5.1.0
pre- 6.1.1.1
Related Commands
•

default-metric

Change the metrics of redistributed routes to a value useful to OSPF. Use this command with the redistribute command.
Syntax default-metric number
To return to the default values, use the no default-metric [number] command.
Parameters
number
Defaults Disabled.
Command Modes ROUTER OSPF
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.6.1.0
7.5.1.0
Description
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
redistribute — redistributes routes from other routing protocols into OSPF.
Enter a number as the metric. The range is from 1 to 16777214.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for the Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Open Shortest Path First (OSPFv2 and OSPFv3) 1077