Dell S6100 Configuration Manual page 524

all
queue
priority-group
buffer-info
Command Modes
EXEC
EXEC Privilege
Command History
Version
9.10(0.0)
9.8(0.0)
9.7(0.0)
Version 9.3(0.0)
Usage Information The following table describes the fields in the output of the show command:
Field
Buffer Accounting
Stats for Unit 0
Port 1 priority-group
0
Max Shared Limit
Default Packet
Buffer allocate for
the priority-group
Accounted Packet
Buffer
Example
Dell# show hardware stack-unit 1 buffer unit 0 port 1 priority-group 0 buffer-
info
-----
Maximum Shared Limit: 0
Default Packet Buffer allocate for the priority-group: 61440
Accounted Packet Buffer: 0
524 Debugging and Diagnostics
• For a 50-Gigabit Ethernet interface, enter the keyword fiftyGigE then the stack/
slot/port/subport information.
• For a 100-Gigabit Ethernet interface, enter the keyword hundredGigE then the
stack/slot/port information.
Display buffer statistics for all ports
Enter the keyword queue followed by id for specific queue or keyword all.
Identifier of the priority group in the range of 0 to 7.
Enter the keyword priority-group followed by {id} for specific priority group or
keyword all.
To display total buffer information for the port interface, enter the keywords buffer-
info. To display a queue range, enter 0 to 14 for a specfic queue or all.
Description
Introduced on the S6100-ON.
Removed the keyword port and added the keywords interface, and the variable
interface . Introduced on the S3048–ON and S4048–ON.
Introduced on the S6000-ON.
Introduced on the S6000 platform.
Description
Displays the counters that are calculated by the buffer statistics tracking method for each
port per priority group on a particular stack member.
Maximum shared buffer space allotted to the specific port for the corresponding stack
unit
The default packet buffer size in KB that is associated with the particular priority group
Shared buffer space that is in use by the packets
Buffer Accounting Stats for Unit 0 Port 1 priority-group 0 -----