Negotiation Auto - Dell S6100 Configuration Manual

Layer 2
Overhead
VLAN Tag
Untagged Packet
with VLAN-Stack
Header
Tagged Packet with
VLAN-Stack
Header

negotiation auto

Enable auto-negotiation on an interface.
Syntax negotiation auto
To disable auto-negotiation, use the no negotiation auto command.
Defaults Enabled.
Command Modes INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.8(2.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.0
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
pre-6.2.1.0
692 Interfaces
Link MTU and IP MTU Delta
22 bytes
22 bytes
26 bytes
Description
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the S6100–ON.
Introduced on the S3100 series.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000-ON.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.