Dell S6100 Configuration Manual page 893

Parameters
vrf vrf-name
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.12.0
8.3.11.1
8.3.1.0
Example
Dell# show isis graceful-restart detail
Configured Timer Value
======================
Graceful Restart
T3 Timer
T3 Timeout Value
T2 Timeout Value
T1 Timeout Value
Adjacency wait time : 30
Operational Timer Value
======================
Current Mode/State
T3 Time left
T2 Time left
Restart ACK rcv count
Restart Req rcv count
Suppress Adj rcv count : 0 (level-1), 0 (level-2)
Restart CSNP rcv count : 0 (level-1), 0 (level-2)
Database Sync count
(Optional) Enter the keyword vrf followed by the name if the VRf to display IS-IS graceful
restart details corresponding to that VRF.
NOTE: If you do not specify this option, the IS-IS graceful restart details
corresponding to the default VRF are displayed.
Description
Introduced on the S6100–ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series.
: Enabled
: Manual
: 30
: 30 (level-1), 30 (level-2)
: 5, retry count: 1
: Normal/RUNNING
: 0
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
: 0 (level-1), 0 (level-2)
Intermediate System to Intermediate System (IS-IS) 893