Show Ip Bgp Cluster-List - Dell S6100 Configuration Manual

Origin codes: i - IGP, e - EGP, ? - incomplete
*>
*>
All the show and debugs commands display the link band width extended-community prefixed with DMZ-Link-bw
along with other extended communities.
Dell# show ip bgp 3.3.3.0/24
BGP routing table entry for 3.3.3.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Not advertised to any peer
Received from :
1.1.1.2 (3.3.3.1)
AS_PATH :
Next-Hop : 1.1.1.2, Cost : 0
Origin IGP, Metric
Extended Communities :
DMZ-Link Bw: 2000 kbytes*
Related Commands
•
•

show ip bgp cluster-list

View BGP neighbors in a specific cluster.
Syntax show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast] cluster-
list [cluster-id]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
cluster-id
Command Modes
•
•
n - network,
Network
55.0.0.0/24
66.0.0.0/24
show ip bgp community — view the BGP communities.
neighbor maximum-prefix — control the number of network prefixes received.
(OPTIONAL) Enter the keyword vrf and then the name of the VRF to view cluster
information of BGP neighbors corresponding to that VRF.
(OPTIONAL) Enter the keywords ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword unicast to view
information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related to only to the ipv6 unicast routes.
(OPTIONAL) Enter the cluster id in dotted decimal format. The range is 1 —
4294967295.
EXEC
EXEC Privilege
D - denied,
Next Hop
172.16.0.2
172.16.0.2
Best
0, LocalPref 100, Weight
S - stale
Metric LocPrf Weight Path
0, internal
Border Gateway Protocol
0 200 i
0 200 i
417