Clear Ip Pim Tib - Dell S6100 Configuration Manual

Version
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
Usage Information This command re-applies the RP mapping logic for all the groups learnt by the node. Any stale information
corresponding to the existing mapping configuration is updated. The existing BSR cache and the *,G's are deleted
only if these entries are stale.

clear ip pim tib

Clear PIM tree information from the PIM database.
Syntax clear ip pim [vrf vrf-name] tib [group]
Parameters
vrf vrf-name
group
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
Introduced on the S-Series.
(OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure this
setting on that VRF.
NOTE: Applies to specific VRF if input is provided, else applies to Default
VRF.
(OPTIONAL) Enter the multicast group address in dotted decimal format (A.B.C.D).
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added support for VRF. Introduced on the S6000-ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series.
PIM-Sparse Mode (PIM-SM) 1199