Show Ip Bgp Extcommunity-List - Dell S6100 Configuration Manual

show ip bgp extcommunity-list

View information on all routes with Extended Community attributes.
Syntax show ip bgp [vrf vrf-name] [ipv4 {multicast | unicast} | ipv6 unicast]
extcommunity-list [list name]
Parameters
vrf vrf-name
ipv4 multicast
ipv4 unicast
ipv6 unicast
list name
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.4.(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
426 Border Gateway Protocol
(OPTIONAL) Enter the keywords vrf and then the name of the VRF to view
information on all routes with extended community attributes corresponding to that VRF.
(OPTIONAL) Enter the keyword ipv4 followed by the keyword multicast to view
information related only to ipv4 multicast routes.
(OPTIONAL) Enter the keywords ipv4 unicast to view information only related to
ipv4 unicast routes.
(OPTIONAL) Enter the keyword ipv6 followed by the keyword unicast to view
information related only to ipv6 unicast routes.
Enter the extended community list name you wish to view. The range is 140 characters.
EXEC
EXEC Privilege
Description
Introduced on the S6100-ON.
Introduced on the Z9100–ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Added the ipv4 multicast and ipv6 unicast parameters.
Added support for VRF.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.