Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
Command Mode
Global Configuration mode
Default Configuration
No permanent entry is defined.
User Guidelines
The software uses ARP cache entries to translate 32-bit IP addresses into 48-
bit hardware (MAC) addresses. Because most hosts support dynamic address
resolution, static ARP cache entries generally do not need to be specified.
Example
The following example adds IP address 198.133.219.232 and MAC address
00:00:0c:40:0f:bc to the ARP table.
Console(config)#
198.133.219.232 00:00:0c:40:0f:bc
arp
1/6
ethernet
arp timeout (Global)
Use the arp timeout Global Configuration mode command to set the time
interval during which an entry remains in the ARP cache. Use the no form of
this command to restore the default configuration.
Syntax
seconds
arp timeout
no arp timeout
Parameters
seconds—Specifies the time interval (in seconds) during which an entry
remains in the ARP cache.
(Range: 1–40000000)
Default Configuration
The default ARP timeout is 60000 seconds in Router mode, and 300 seconds
in Switch mode.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
605
IP Addressing Commands
Advertisement
Table of Contents
